State Environmental Planning Policy (Exempt and Complying Development Codes) 2008

pt 2, div 1, sdiv 20B, 20C: Ins 2021 (597), Sch 1. 2.82A Specified development (1) The construction or installation of a bicycle rack or bicycle locker is development specified for this code. (2) In this subdivision— bicycle locker means an enclosed lockable space designed to store 1 bicycle. bicycle rack means a device that is a stationary fixture for parking at least 1 bicycle and allows the bicycle frame or wheel to be locked to the device. cl 2.82A: Ins 2025 (528), Sch 1[13]. 2.82B Development standards—general The standards specified for development under this subdivision are that the development must— (a) be associated with existing development for the purposes of— (i) commercial premises, or (ii) industries, or (iii) residential accommodation, and (b) not be constructed or installed on or in a heritage item or a draft heritage item, and (c) not contravene a condition of a development consent or a complying development certificate that applies to the land, and (d) be within existing hardstand parking or storage areas of the premises, including a garage or basement, that are not steeper than 1:20 gradient, and (e) not obstruct vehicular or pedestrian circulation areas, including fire escapes, vehicular parking areas or access to services, utilities or other infrastructure, and (f) be designed to prevent motor vehicles encroaching, and Note— Barriers, such as bollards or fencing, may be used to prevent a car from driving or parking close to the storage. (g) if the development will be available for use by more than 1 user—include directional and identification signage, and (h) if the development is on land that is subject to the Strata Schemes Management Act 2015 or the Community Land Management Act 2021 —have the prior approval of the owners’ corporation or the community, precinct or neighbourhood association. cl 2.82B: Ins 2025 (528), Sch 1[13]. 2.82C Development standards—bicycle lockers The standards specified for development under this subdivision for the purposes of bicycle lockers are that the development must— (a) be single-level bicycle lockers only, and (b) provide for the upright storage of 1 bicycle, and (c) be located behind the building line of any road frontage, and (d) for each bicycle locker— (i) have a width of at least 1m, and (ii) have a depth of at least 2m, and (iii) have a height of at least 2m, and (iv) face a clear area with a width of at least 2m, and (v) have a door that opens outwards and is lockable. cl 2.82C: Ins 2025 (528), Sch 1[13]. 2.82D Development standards—bicycle racks The standards specified for development under this subdivision for the purposes of bicycle racks are that the development must— (a) for development in a heritage conservation area or a draft heritage conservation area—be located behind the building line of any road frontage, and (b) be floor mounted and not vertical or mechanised, and (c) be at least 1m from any other bicycle rack, bicycle locker, wall, fence or circulation area, and (d) if an access aisle is provided between bicycle racks—provide that the width of the aisle is at least 2.8m. cl 2.82D: Ins 2025 (528), Sch 1[13].