Changes commencing December 12th, 2025
Comparing the consolidation as at November 28th, 2025 with December 12th, 2025 · 23 changes
(2) Development consent must not be granted for development to which this section applies unless— (a) the site area of the development is at least 1,000m 2 , and (b) the frontage of the site area of the development is at least 20m measured at the building line, and (c) for development on land in a residential zone where residential flat buildings are not permitted— (i) the development will not result in a building with a height of more than 9.5m, excluding servicing equipment on the roof of the building, and (ii) if the roof of the building contains servicing equipment resulting in the building having a height of more than 9.5m—the servicing equipment complies with subsection (3), and (iii) if the development results in a building with more than 2 storeys—the additional storeys are set back within planes that project at an angle of 45 degrees inwards from all side and rear boundaries of the site.
(2) Development consent must not be granted for development to which this section applies unless— (a) the site area of the development is at least 1,000m 2 , and (b) the frontage of the site area of the development is at least 20m measured at the building line, and (c) for development on land in a residential zone where residential flat buildings are not permitted— (i) the development will not result in a building with a height of more than 9.5m, excluding servicing equipment on the roof of the building, and (ii) if the roof of the building contains servicing equipment resulting in the building having a height of more than 9.5m, the servicing equipment must— (A) be fully integrated into the design of the roof or contained and suitably screened from view from public places, and (B) be limited to an area of no more than 20% of the surface area of the roof, and (C) not result in the building having a height of more than 11.5m, and (iii) if the development results in a building with more than 2 storeys—the additional storeys are set back within planes that project at an angle of 45 degrees inwards from all side and rear boundaries of the site.
Based on content from the New South Wales Legislation website sourced at 2025-12-12. For the latest information on New South Wales Government legislation please go to https://www.legislation.nsw.gov.au.
This is an unofficial reproduction provided for convenience. It is not the official version of the legislation. For the official, in-force version, see legislation.nsw.gov.au.