Comparing the consolidation as at November 14th, 2025 with December 12th, 2025 · 271 changes
Earlier · as at November 14th, 2025
Later · as at December 12th, 2025
Earlier · as at November 14th, 2025
Schedule 4 > Part 2
Part 2 Complying development
Complying development
Column 1 Column 2 Item Development purpose Development standards 1 Subscriber and non-subscriber connection to a telecommunications network deployed by means of radio or satellite dish (including a radiocommunications dish) on land in Zone R1, R2, R3, R4, R5 or RU5 or an equivalent land use zone 1.1 If the dish is located on a roof, the dish must— (a) not be more than 1.8 metres in diameter, and (b) be no higher than 2.4 metres above the highest point of the roof. 1.2 If the dish is ground mounted, the dish must— (a) be located in the rear yard, and (b) not be more than 1.8 metres in diameter, and (c) be no higher than 2.4 metres above the highest point of the existing ground level on the lot. 1.3 The dish must be the same colour as its background or painted a neutral colour such as grey. 1.4 If located in a heritage conservation area, the dish must not be visible from the street at ground level from the property boundary. 2 A panel antenna, yagi antenna or other directional antenna on land other than in Zone R1, R2, R3, R4, R5 or RU5 or an equivalent land use zone 2.1 If the antenna is not flush mounted to an existing structure— (a) the antenna must not be more than 2.8 metres long, and (b) the antenna must not be more than 8 metres (including support mount) in height above the building or structure to which it is attached, and (c) if located in a heritage conservation area—the antenna must not be visible from the street at ground level from the property boundary. 2.2 The antenna must be the same colour as its background or painted a neutral colour such as grey. 3 An omnidirectional antenna on land other than in Zone R1, R2, R3, R4, R5 or RU5 or an equivalent land use zone 3.1 An antenna must not be— (a) more than 8.5 metres in height, and (b) outrigged more than 500 millimetres from the support mount. 3.2 The antenna must be the same colour as its background or painted a neutral colour such as grey. 3.3 If located in a heritage conservation area, the antenna must not be visible from the street at ground level from the property boundary. 4 An extension to a tower on land other than in Zone R1, R2, R3, R4, R5 or RU5
Based on content from the New South Wales Legislation website sourced at 2026-06-30. For the latest information on New South Wales Government legislation please go to https://www.legislation.nsw.gov.au.
This is an unofficial reproduction provided for convenience. It is not the official version of the legislation. For the official, in-force version, see legislation.nsw.gov.au.
Commencement not yet recorded. The comparison date identifies a consolidation, not necessarily when this change took legal effect. Verify commencement before relying on it.
or an equivalent land use zone
4.1 The extension must be— (a) no greater than 7.5 metres in height, and (b) for co-location purposes. 4.2 The tower to be extended must not have previously been extended. 5 New tower on land in Zone E4, E5, IN1, IN2, IN3, RU1, RU2, RU3 or RU4
or an equivalent land use zone
5.1 If the tower is located on land in Zone E4, E5, IN1, IN2 or IN3
or an equivalent land use zone
, the tower must not— (a) be located within 100 metres of a Zone R1, R2, R3, R4, R5 or RU5 or equivalent land use zone boundary, or (b) exceed 25 metres in height (including telecommunications facilities) where located between 100 and 150 metres from a Zone R1, R2, R3, R4, R5 or RU5 or equivalent land use zone boundary, or (c) exceed 30 metres in height (including telecommunications facilities), where located more than 150 metres from a Zone R1, R2, R3, R4, R5 or RU5 or equivalent land use zone boundary. 5.2 If the tower is located on land in Zone RU1, RU2, RU3 or RU4
or an equivalent land use zone
, the tower must not— (a) be located within 100 metres of a Zone R1, R2, R3, R4, R5 or RU5 or equivalent land use zone boundary, and (b) exceed 25 metres in height (including telecommunications facilities) where located between 100 and 150 metres from a Zone R1, R2, R3, R4, R5 or RU5 or equivalent land use zone boundary, and (c) exceed 50 metres in height (including telecommunications facilities), where located more than 150 metres from a Zone R1, R2, R3, R4, R5 or RU5 or equivalent land use zone boundary. 6 Ancillary facilities to a telecommunications facility 6.1 If located in a heritage conservation area, the facilities must not be visible from the street at ground level from the property boundary. 6.2 If the facilities include a standby power generator, it must be insulated to ensure noise levels do not exceed 35dB(A) from outside the generator housing.
Later · as at December 12th, 2025
Schedule 4 > Part 2
Part 2 Complying development
Complying development
Column 1 Column 2 Item Development purpose Development standards 1 Subscriber and non-subscriber connection to a telecommunications network deployed by means of radio or satellite dish (including a radiocommunications dish) on land in Zone R1, R2, R3, R4, R5 or RU5 1.1 If the dish is located on a roof, the dish must— (a) not be more than 1.8 metres in diameter, and (b) be no higher than 2.4 metres above the highest point of the roof. 1.2 If the dish is ground mounted, the dish must— (a) be located in the rear yard, and (b) not be more than 1.8 metres in diameter, and (c) be no higher than 2.4 metres above the highest point of the existing ground level on the lot. 1.3 The dish must be the same colour as its background or painted a neutral colour such as grey. 1.4 If located in a heritage conservation area, the dish must not be visible from the street at ground level from the property boundary. 2 A panel antenna, yagi antenna or other directional antenna on land other than in Zone R1, R2, R3, R4, R5 or RU5 2.1 If the antenna is not flush mounted to an existing structure— (a) the antenna must not be more than 2.8 metres long, and (b) the antenna must not be more than 8 metres (including support mount) in height above the building or structure to which it is attached, and (c) if located in a heritage conservation area—the antenna must not be visible from the street at ground level from the property boundary. 2.2 The antenna must be the same colour as its background or painted a neutral colour such as grey. 3 An omnidirectional antenna on land other than in Zone R1, R2, R3, R4, R5 or RU5 3.1 An antenna must not be— (a) more than 8.5 metres in height, and (b) outrigged more than 500 millimetres from the support mount. 3.2 The antenna must be the same colour as its background or painted a neutral colour such as grey. 3.3 If located in a heritage conservation area, the antenna must not be visible from the street at ground level from the property boundary. 4 An extension to a tower on land other than in Zone R1, R2, R3, R4, R5 or RU5 4.1 The extension must be— (a) no greater than 7.5 metres in height, and (b) for co-location purposes. 4.2 The tower to be extended must not have previously been extended. 5 New tower on land in Zone E4, E5, IN1, IN2, IN3, RU1, RU2, RU3 or RU4 5.1 If the tower is located on land in Zone E4, E5, IN1, IN2 or IN3, the tower must not— (a) be located within 100 metres of a Zone R1, R2, R3, R4, R5 or RU5 or equivalent land use zone boundary, or (b) exceed 25 metres in height (including telecommunications facilities) where located between 100 and 150 metres from a Zone R1, R2, R3, R4, R5 or RU5 or equivalent land use zone boundary, or (c) exceed 30 metres in height (including telecommunications facilities), where located more than 150 metres from a Zone R1, R2, R3, R4, R5 or RU5 or equivalent land use zone boundary. 5.2 If the tower is located on land in Zone RU1, RU2, RU3 or RU4, the tower must not— (a) be located within 100 metres of a Zone R1, R2, R3, R4, R5 or RU5 or equivalent land use zone boundary, and (b) exceed 25 metres in height (including telecommunications facilities) where located between 100 and 150 metres from a Zone R1, R2, R3, R4, R5 or RU5 or equivalent land use zone boundary, and (c) exceed 50 metres in height (including telecommunications facilities), where located more than 150 metres from a Zone R1, R2, R3, R4, R5 or RU5 or equivalent land use zone boundary. 6 Ancillary facilities to a telecommunications facility 6.1 If located in a heritage conservation area, the facilities must not be visible from the street at ground level from the property boundary. 6.2 If the facilities include a standby power generator, it must be insulated to ensure noise levels do not exceed 35dB(A) from outside the generator housing.